How to Hang a Backpack Leaf Blower

On this page (8 sections)

1. What do you need before you hang a backpack leaf blower?
2. Where is the best place to hang a backpack leaf blower?
3. How do you fix the hooks so the blower hangs safely?
4. How do you lift and hang a backpack leaf blower?
5. Which backpack leaf blowers hang easily, and how much do they weigh?
6. How do you store the battery and tube when the blower is hung?
7. What mistakes should you avoid when hanging a backpack blower?
8. How to hang a backpack leaf blower: the short version

To hang a backpack leaf blower, fit two sturdy hooks or a wall bracket rated above the blower's weight, set them about shoulder height, and hang the blower by its shoulder straps or frame loop so the tube hangs clear. Take the battery out first, and check the mount holds before you let go.

The job is mostly about the mount and the height. A blower that swings against a wall or drags its tube on the floor gets knocked around, and that shortens the life of the tube and the straps.

The steps below cover choosing the spot, fixing the hooks, lifting the blower on safely and storing it well between jobs.

What do you need before you hang a backpack leaf blower?

You need a solid wall, two hooks or a bracket rated for more than the blower's weight, and a drill with the right fixings for your wall type. Add a stud finder if you plan to screw into timber framing.

The blower's weight sets the rating. Backpack models vary, and the Greenworks 60V and 40V backpacks weigh 9.5 pounds each, while the EGO LB6003 is a heavier tool with its 56V 7.5Ah battery.

That weight is the reason the mount has to be chosen for the tool, not for a generic hook. Our guide to how much a leaf blower weighs helps you compare before you buy the fixings.

Check the wall first. Masonry needs plugs and screws made for brick or block.

Drywall alone rarely holds a hanging tool, so aim for a stud or use a bracket that spreads the load. A bracket with a backplate is easier to trust than two small cup hooks.

Where is the best place to hang a backpack leaf blower?

The best spot is a dry wall in a garage or shed, out of walkways and above floor damp. Pick somewhere the blower won't be bumped by bikes, bins or car doors.

Height matters as much as location. Hooks set so the tube clears the floor by a few inches keep the blower off the ground and stop the tube bending.

A spot near the door you use for yard work saves lifting it far.

Avoid walls that get wet. A corner under a leaking gutter or beside a damp concrete wall is a poor home for any cordless tool.

Keep the mount away from shelving you reach into often, so the blower isn't knocked when you pull a box down.

How do you fix the hooks so the blower hangs safely?

Fix the hooks into solid material with fixings rated above the blower's weight, spaced to match the strap or loop positions. Drill the pilot holes, fit the hooks, then pull hard on each one before trusting it.

Mark the spacing by holding the blower against the wall at the height you want. Straps sit at different points on each model, so measure rather than guess.

If your blower has a frame loop or carry handle, one central hook can be enough. Otherwise two hooks spread the load.

Tighten everything fully. A hook that turns under load will let the blower slip, and a swinging blower can crack its housing.

If the wall feels soft around a fixing, move to a stud or add a backing board.

How do you lift and hang a backpack leaf blower?

Take the battery out, lift the blower with both hands, and hook the straps or loop over the mount one at a time. Let the blower settle before you release it.

Battery out first is the main safety step. It cuts the weight and means the blower can't start if the trigger is knocked.

It also keeps a lithium battery off a hook where it could fall. If you haven't used the blower yet, our guide to how to turn on a leaf blower covers the controls before your first job.

Hang the tube so it points down or along the wall, not out into the walkway. Check that the blower isn't resting its weight on the tube, since the tube is the part most likely to crack.

Give it a gentle push to confirm it stays put.

Which backpack leaf blowers hang easily, and how much do they weigh?

A lighter blower is easier to lift onto a hook, and the Greenworks backpacks at 9.5 pounds are the easier of these three to lift and hang. The EGO LB6003 carries a 56V 7.5Ah battery.

The EGO LB6003 Backpack is the strongest of the group on paper. EGO says turbo mode reaches up to 600 CFM and 145 MPH, and the kit includes a 56V 7.5Ah battery and charger.

That big battery means more weight to lift, so plan the hook height for it.

The Greenworks 60V Backpack reaches 550 CFM and 160 MPH with a 5.0Ah battery and 6A charger. Greenworks says the backpack harness spreads the weight across your shoulders, which also helps when you lift it onto a mount.

Its 72.8 dB noise level is louder than the EGO's 64 dB, worth knowing if you blow near neighbours.

The Greenworks 40V Backpack has the highest airflow of the three at 660 CFM and 165 MPH in turbo mode. It runs on a 5.0Ah battery with a 5A charger.

Its 76 dB noise level is the highest here, so it's the one to hang furthest from the house if noise matters. Our explainer on how loud a leaf blower is puts those decibels in context.

Whichever model you choose, the mount should be rated above its full hanging weight. If airflow matters more to you than weight, our guide to what is a good CFM for a leaf blower helps you judge the numbers.

How do you store the battery and tube when the blower is hung?

Store the battery indoors, off the blower and away from the hook, and keep the tube fitted or hung beside it. That keeps both parts dry and stops the tube getting crushed.

Lithium batteries don't like extreme heat or cold. A garage that bakes in summer or freezes in winter is a poor home for one, so bring it inside.

Keep it away from metal tools that could touch the terminals.

Hang the tube straight or coil it loosely. A sharp bend left for months can set a kink in the plastic.

Wipe dirt off the tube and the blower's intake before storage so debris doesn't harden inside.

What mistakes should you avoid when hanging a backpack blower?

The main mistakes are hanging a blower on a weak hook, leaving the battery in, and letting the tube take the weight. Each one risks a fall or damage to the tool.

Skip single small cup hooks for a heavy backpack model. Skip drywall anchors that aren't rated for the load.

And don't hang the blower by the tube, since the tube isn't designed to carry the body.

Check the mount now and then. A hook that has worked loose, or a strap that has frayed, is a warning to fix it before the next job.

Hang the blower high enough that children and pets can't reach it, and keep the area under it clear.

How to hang a backpack leaf blower: the short version

Pick a dry wall, fix two hooks rated above the blower's weight, set them so the tube clears the floor, and hang the blower by its straps or loop with the battery out. That's the whole job, and it takes about half an hour once you have the fixings.

Of the three blowers here, the EGO LB6003 Backpack is the one to choose if you want a quieter tool and a strong power-to-noise balance. Pick the Greenworks 40V if maximum airflow is your priority.

The Greenworks 40V suits anyone already on that battery platform who wants turbo power for wet leaves.

Whichever you hang, check the mount before every season and bring the battery indoors between jobs. A blower that stays dry, off the floor and easy to reach is ready when the leaves fall.

Frequently asked questions

Can I hang a backpack leaf blower by its shoulder straps?

Yes, if the straps are firmly stitched and the hooks are wide enough not to crease them. Spread the load across both straps where the design allows, and keep the blower's body close to the wall so the tube isn't pulling on the fabric.

How high should a blower hook be?

Set the hooks so the blower's tube clears the floor by a few inches when it hangs. That usually means the hook sits around shoulder height, but it depends on the blower's length.

A loop you can reach without stretching is the aim.

Should I remove the battery before hanging the blower?

Yes, pull the battery first. It drops the hanging weight and removes the main fire risk if the blower is knocked or the hook fails.

Store the battery indoors at a moderate temperature, away from the blower, following the maker's storage advice.

Can I hang a backpack blower in a shed or garage?

A dry, sheltered wall works well, as long as the mount is fixed into solid material and the blower stays off the floor. Avoid spots with dripping water or strong damp.

Bring the battery inside if the shed gets very cold or very hot.